MicroFire Warrior III (K3500)HID



The MicroFire Warrior-III HID flashlight represents the top of the line in hand-held HID flashlight technology.
Using a 35 watt HID lamp and powered by a rechargeable Lithium Ion battery with a miniaturized electronic ballast,
the Warrior-III produces up to
3500 lumens of extremely bright white light capable of illuminating subjects up to 800 yards distant.
Physically larger than the other Warrior models, the W-III features a
focusable beam of intense white light with a spread adjustment from 15-24.
Body and lamp housings are CNC machined from aircraft-grade aluminum with a black, hard anodized finish and non-slip hand holds.
Optional rubber shock absorbers will protect the Warrior III from damage if dropped onto a hard surface      

35W HID Lamp      
Working voltage range
K3N rechargeable Li-ion Polymer battery pack      
Charging time: 4 hours approximately with KN AC charger .      
3500 lumens @ 55 +/- 5 minutes      
Illuminating subjects up to
800 yards distant

Bezel diameterΦ76mm  
Body diameter
800g approximately (1.76 pounds)   
Colour temperature
Working temperature
Tactical button switch       
Water proof
splash proof


Standard Accessories:

1Rubber drop protection sheath






Fenix TK30 BLACK



Features of Fenix TK30 flashlight:

  • Cree MC-E LED with 50,000 hour lifespan
  • Uses two CR123A batterys or one 18650 rechargeable battery
  • Uses four CR123A batterys or two 18650 rechargeable batteries (with extension tube)
  • Three sets of modes, two types of output for each mode, selected by turning the bezel
  • Performance using two 2500 mAh 18650 rechargeable batteries (with extension tube)
    • Searching Mode: Output A - 100 Lumens / 16 Hours
      Output B -
      630 Lumens / 1.5 Hours
    • Camping Mode: Output A - 12 Lumens / 90 Hours
      Output B - 175 Lumens / 8.4 Hours
    • Hunting Mode: Output A - Strobe / 3 Hours
      Output B -
      630 Lumens / 1.5 Hours
  • Max beam length: 300 meters (with extension tube)
  • Digitally regulated for constant output
  • Intelliegent memory function
  • Working voltage: 3V~10V
  • Weight - 183g (excluding batteries) / 215g (excluding batteries, with extension tube)
  • Dimensions - 208mm (L) x 39.4mm (D)
  • Made of aircraft-grade aluminum
  • Durable Type-III hard-anodized finish
  • Waterproof to IPX-8 standard
  • Toughened ultra-clear glass lens with anti-reflective coating
  • Tactical tailcap switch with momentary-on function
  • Included accessories: lanyard, extension tube, a battery positive connector, two spare o-rings, and a rubber switch boot.



Fenix PD10 2010


Features of Fenix PD10 2010:

Cree XP-E LED (R2) with lifespan of 50,000 hours
Three level of brightness - Mid (95 lumen, 3 hrs) -> Low (6 lumen, 64 hrs) -> High (
190 lumen, 1hr)
Max beam length - 110 meters
Digitally regulated output - maintains constant brightness
Uses one 3V CR123A battery (Lithium)
73mm (Length) x 19mm (Diameter)
Made of durable T6 aircraft-grade aluminum
Premium Type III hard-anodized anti-abrasive finish
24-gram weight (excluding the battery)
Waterproof to IPX-8 Standard
Toughened ultra-clear glass lens with anti-reflective coating
Reliable twist switch (Patented)
Capable of standing up securely on a flat surface to serve as a candle
Included accessories: lanyard, two spare o-rings, body clip